Deutsche
Français
ItalianoFREE SHIPPING *
*Valid only in Italy for all orders starting from € 250.00
CAN'T FIND A SPARE PART?
Send your request to ricambi@shopclima.it!
|
MITSUBISHI ELECTRIC MEHP-IB07V Reversible R32 Heat Pump with Air Source and Variable Speed Compressors - 7.0 kW Single-Phase
Mitsubishi Electric MEHP-IB07V reversible heat pump, with air source and Twin Rotary or Scroll compressors in R32 gas, with 7.0 kW single-phase power supply. Possibility of creating cascade systems (up to 4 heat pumps).
€3,564.00
CUSTOM OPTIONS
MITSUBISHI ELECTRIC MEHP-IB07V Reversible R32 Heat Pump with Air Source and Variable Speed Compressors - 7.0 kW Single-Phase is available to buy in increments of 1
Mitsubishi Electric's MEHP-iB-G07 reversible heat pumps, with air source and range from 7 to 40 kW, are equipped with a variable speed compressor and R32 refrigerant and are able to meet the demands of small-medium size residential and commercial applications making it a valid alternative to classic gas or fuel heating systems.
The MEHP-iB-G07 range is equipped with: Twin Rotary or Scroll variable speed compressors (Inverter Driven), high efficiency EC fans and electronic expansion valve in addition to the integrated hydronic module which includes a pump with variable flow EC motor, expansion vessel and flow switch. These units, which allow Plug&Play type installation, adapt to different load conditions thanks to the precise temperature control, also obtained thanks to the use of Inverter technology in all its components, while guaranteeing high levels of energy efficiency both at full load and partial loads. The SCOP values allow you to reach the A+++ (SCOP 35°C) and A++ (SCOP 55°C) energy class.
The entire series uses the W3000+ control software which is able to integrate different energy sources based on availability, performance and costs of use, always favoring renewable sources: the auxiliary sources, in fact, are used only to achieve any requests from the building with low external temperatures. In addition, the optional Kiplink device enables local and remote monitoring function.
Thanks to the "Master/Client" function, it is possible to connect up to 4 heat pumps in cascade. Here are the details:
- no additional hardware is required except for the 2-probe kit;
- from 2 to 4 heat pumps of the same size for a total power of up to 160 kWf;
- possibility of enabling one or all heat pumps for ACS (it is not possible to set an intermediate value); in this case, the 3-way valves must also be purchased and, for each heat pump used to produce ACS, 2 3-way valves for ACS;
- power modulation is "saturation" (when the first unit reaches 100% of the power, the next one starts working);
- during operation in ACS production, the other heat pumps will continue to operate in the previous mode (this does not happen with Ecodan units);
- with cascade systems with heat pumps of different power, it is necessary to purchase the HMI-M remote control, while with heat pumps of the same power there is no need;
- with the "Master/Client" mode in operation it is not possible to enable the dynamic Set Point, the 4-20 mA auxiliary input, the 2-zone control with double Set Point and the SG Ready function.
ATTENTION: in the case of cascade systems, the configuration and start-up service is mandatory. It will therefore be necessary to purchase a start-up and a kit of 2 ACS probes + Buffer Tank for each heat pump.
| Dimensions (LxHxD mm) | n.d. |
|---|---|
| Weight (Kg) | n.d. |
| Power supply | Tensione/Freq./Fasi (V/Hz/n°) 230/50/1 |
| Supply | Single-Phase |
| Refrigerant Gas | R32 |
| Unit Power (kW) | 7.0 |
Our staff is qualified and experienced and it has all the necessary equipment to design and install any air conditioning systems to perfection.
Our technicians are in fact equipped with refrigeration license, as required by law, and perform regular refresher courses directly from the parent companies; therefore they are familiar with all the characteristics of the products sold on Shopclima.it in order to provide professional, qualified and guaranteed technical support.
Please feel free to contact us for more information or a customized quote.
Elettrodomex Srl guarantees the good quality of the products for sale on Elettrodomex.it and it is responsible to the consumer for any lack of conformity existing at the time of delivery of the goods. Elettrodomex Srl undertakes, during the warranty period specified below, to repair (at its warehouse) or replace as soon as possible those parts or products that prove defective, provided that this does not depend on breakages or failures caused by incompetence or negligence of the customer, lack of maintenance, use outside the technical specifications or purposes of use, fortuitous events or major force.
The warranty period is 24 months from the invoice date (12 months for professional buyers and users), therefore any lack of conformity must be reported within 24 months after the date of purchase (12 months for professional buyers and users). The time limit within which the defect of the product must be communicated from the moment it is manifested is 2 months.
The lack of conformity can be found for malfunction, manufacturing defect, discrepancy between what was sold and what was received by the Customer
The warranty will apply to products that show conformity defects or faults not found or found at the time of purchase, provided they have been used correctly and in compliance with their destination and as required by any technical documents. The warranty will not be applied in case of negligence and carelessness from the customer, as well as mechanical or electronic changes not prescribed by the manufacturer.
For any further information regarding our order guarantees, contact us.
CAN'T FIND A SPARE PARTS?
No problem, just ask our staff. It is a totally free service.
